Skip to main content

Before You Enable RDP, Check These Seven Settings

Hardening RDP security settings takes under an hour and closes the entry points attackers exploit most. Check these seven configurations before you go live.

Cybersecurity October 26, 2026 3 Min Read By MYDWARE IT Solutions Inc.
Server rack and network patch panel inside a small data closet with blue-green indicator lights glowing in dim light

Key Takeaways

  • Change the default RDP port and restrict access to known IP addresses to reduce automated scanning exposure.
  • Multi-factor authentication on RDP logins stops credential-stuffing attacks even when passwords are compromised.
  • Network Level Authentication forces identity verification before a remote session is fully established.
  • Limiting which accounts can initiate RDP sessions removes a common privilege-escalation path.
  • Regular auditing of RDP logs helps you catch unauthorised access attempts before they escalate.

Hardening your RDP security settings — the configuration options that control how Windows Remote Desktop accepts and authenticates connections — is the single most effective way to prevent attackers from exploiting this built-in feature. Left at their defaults, these settings are among the most reliably targeted weaknesses on any internet-connected system, and most fixes take under an hour to apply.

Why Is RDP Such a Common Attack Target?

RDP listens on a well-known default port and accepts password-based logins out of the box. Automated scanning tools probe the internet constantly for open RDP ports, then attempt thousands of username and password combinations in seconds. The configuration weaknesses attackers exploit most are also the easiest to fix. That is what makes inaction difficult to justify.

How Do You Improve RDP Security Settings Step by Step?

1. Change the Default Listening Port

RDP listens on port 3389 by default. Changing it to a non-standard port does not make your system invisible, but it removes it from the results of most automated scans that target that specific port exclusively.

2. Enable Network Level Authentication

Network Level Authentication (NLA) requires a user to verify their identity before a full remote session is created. This single change blocks a broad class of unauthenticated exploits and reduces the load on your server from failed connection attempts.

3. Require Multi-Factor Authentication

A password alone is not sufficient protection for a remotely accessible system. Add a second verification step — such as an authenticator app or hardware token — so that a stolen or guessed password cannot open a session on its own.

4. Restrict Access by IP Address

Use your firewall to allow RDP connections only from specific, trusted IP addresses or ranges. If your staff connect from fixed office or home addresses, there is no reason for the rest of the internet to reach your RDP port at all.

5. Limit Which Accounts Can Use RDP

By default, all administrator accounts can initiate remote desktop sessions. Remove generic and shared admin accounts from the Remote Desktop Users group. Grant RDP access only to named individuals who genuinely need it, and revoke it promptly when they no longer do.

6. Place RDP Behind a VPN or Remote Access Gateway

Rather than exposing RDP directly to the internet, route it through a VPN — a private encrypted tunnel — or a dedicated remote access gateway. An attacker must first defeat your VPN authentication before they can even attempt an RDP login.

7. Audit and Monitor RDP Login Logs Regularly

Windows records every successful and failed RDP login attempt. Review these logs on a set schedule, or configure alerts for repeated failures from unfamiliar IP addresses. Early detection gives you time to respond before an attacker establishes a foothold.

What Else Should Your RDP Security Settings Checklist Cover?

Securing RDP is not a one-time task. Keep the operating system and remote desktop components patched, because vulnerabilities in RDP are discovered and exploited on an ongoing basis. Disable RDP entirely on any machine that does not require remote access — an unused open door is still a risk.

  • Disable RDP on servers and workstations that have no remote access requirement.
  • Use dedicated service accounts with minimal permissions for any automated remote tasks.
  • Review your firewall rules after any staff change that affects remote access needs.

Take Action Before an Attacker Does

These seven steps represent the configuration baseline every system with RDP enabled should meet. If you are unsure whether your current setup meets the standard for sound RDP security settings, book a cybersecurity risk assessment with MYDWARE and get a clear, actionable picture of where your remote access exposure lies.

Darryl Cresswell

CEO & President

MYDWARE IT Solutions Inc.

The configuration weaknesses attackers exploit most are also the easiest to fix.
Share This Post

Frequently Asked Questions

Is it safe to leave RDP enabled if we use a strong password?
A strong password reduces risk but is not sufficient on its own. Automated tools can attempt millions of combinations, and credentials are frequently stolen through phishing. Combining a strong password with multi-factor authentication, Network Level Authentication, and IP restrictions provides meaningful protection where a password alone does not.
Does changing the RDP port actually improve security?
Changing the default port from 3389 to a non-standard number reduces exposure to automated scans that target only the default port. It is a useful layer within a broader set of RDP security settings but should never substitute for authentication controls, firewall restrictions, and active monitoring.
What is Network Level Authentication and why does it matter?
Network Level Authentication requires a user to verify their identity before the remote desktop session is fully established. This prevents unauthenticated connections from reaching the login screen, blocking certain classes of exploits and reducing denial-of-service risk from large numbers of incomplete connection attempts.
Should we route RDP through a VPN instead of exposing it directly?
Yes, routing RDP through a VPN is strongly recommended. A VPN adds an authenticated, encrypted layer that an attacker must defeat before reaching your RDP service at all. Direct internet exposure of RDP — even on a non-standard port — is considered a high-risk configuration by most security frameworks.
How often should we review who has RDP access?
Review RDP access permissions whenever a staff member changes roles or leaves, and conduct a full audit at least every quarter. Accounts that retain access after they are no longer needed are a common source of unauthorised entry, particularly when credentials have been reused or shared across systems.